DTG Ink for Cotton Garments: White and Colour Inks
DTG ink is a water-based pigment ink printed straight onto cotton garments. Hongsam, founded in 2001 and based in Zhengzhou, Henan, makes JETTEXTILE® DTG Ink in white and process colours for light and dark cotton T-shirts.
Request samples and a quotation
- Founded
- 2001
- Employees
- 301–500

What Is DTG Ink and How Does It Print on Cotton Garments?
DTG ink is a water-based pigment ink jetted directly onto a garment, so colour lands on the fabric rather than on a transfer film. On dark shirts the printer lays a white underbase, then prints cyan, magenta, yellow and black above it; on light shirts colour prints alone. HONGSAM JETTEXTILE® DTG Ink comes in C, M, Y, K and W for light and dark cotton T-shirts.
Printhead, white layer, pre-treatment and curing decide the result together: the machine sets which grade fits, the white decides how a dark shirt reads, and the drying profile fixes the print for washing. A quotation is built from the same details.
Direct to Garment Ink: Chemistry, Fabric Fit and Process Steps
Direct to garment ink carries colour as pigment particles dispersed in water. The head jets the dispersion onto cotton, the fibre absorbs the water, and the pigment stays at the surface held by the ink’s binder. Absorbent cellulosic fabrics take this chemistry well because they pull the carrier away quickly.
Pre-treatment is applied before printing: it wets the fabric evenly, limits wicking so edges stay sharp and gives the white layer a base. Hongsam DTG ink supports wet and dry printing. T-shirts, hoodies, jeans, sportswear and jerseys are the garments this process suits.
Epson DTG Ink and Printer Compatibility
HONGSAM DTG ink is offered for DTG printers that use Epson printheads, covering the A4, A3 and A2 desktop classes including Epson F2000 and F2100. These machines print white and colour onto cotton T-shirts without a transfer step.
DTG white ink is supplied for Epson, KM, Kyocera, Ricoh G5, Ricoh G6, StarFire, Samba and other printheads. Sending printer and printhead model through the inquiry form confirms the ink against the exact machine.
DTG Ink for Epson: F2000, F2100 and A4–A2 DTG Printers
On Epson-head machines the ink set is C, M, Y, K and W. Dark fabric takes pre-treatment before printing: Hongsam pre-treatment liquid is sprayed uniformly across the surface before white or colour ink is jetted, so the white layer sits evenly and the colours above it read at strength.
Cleaning fluid, ink guide fluid and printhead protection liquid belong with the ink on these printers:
- Cleaning fluid
- Ink guide fluid
- Printhead protection liquid
DTG White Ink: Whiteness, Hiding Power and Standby Performance
On a dark garment the white layer is the base for everything printed above it. Its opacity decides whether the colour inks read as the intended shade or sink into the fabric tone, so whiteness and hiding power are the properties to compare before anything else.
- High whiteness and good hiding power
- Good compatibility with colour inks, with improved colour saturation and vividness
- Standby performance and printing fluency that protect the printhead
DTG White Ink in the Print Process: Pre-treatment and Curing
White ink printing on dark cotton runs in a fixed order, and the drying stage at the end is what holds the print through washing:
- Spray Hongsam pre-treatment liquid uniformly on the dark fabric
- Optionally dry at 120℃
- Print white ink, then colour ink
- Pre-dry at 80–120℃
- Dry for 2–3 minutes at 150–170℃
Hongsam DTG ink supports wet and dry printing, so the sequence runs on fabric still damp from pre-treatment or on fabric dried before it enters the machine.
White Ink on Dark and Light Cotton T-shirts
White is the underbase on dark shirts, while most light-shirt designs print in colour alone. The pre-treatment liquid is chosen for the fabric:
- PP-05/PP-08 for dark coloured fabrics, matched with white ink
- 9#A/PP-01/PP-03 for light coloured fabrics
DTG Water Based Inks: Pigment Chemistry and Fabric Suitability
Cotton and similar absorbent fabrics suit it because they take up the water carrier quickly.
The white ink is formulated for a delicate hand feel with no roughness, which matters on large white areas across a shirt front. Pre-treatment liquid, cleaning fluid and printhead protection liquid belong with the ink.
DTG Textile Ink in a One-Stop Garment Printing Solution
Hongsam supplies a one-stop solution for garment printing: the garment printer, DTG ink, pre-treatment liquid, cleaning fluid, printhead protection liquid and ink guide fluid. One supplier for the ink and the liquids around it keeps pre-treatment, white layer and colour set working to the same assumptions.
OEM and private-label cooperation can be discussed according to product requirements, market needs and mutually agreed commercial terms.
Quotation Details for DTG Ink Orders
A quotation is prepared from the printer model, the printhead model, the fabric type and colour depth, and the ink set required. Sending a printed sample with those details lets the ink be checked on the same substrate before the order is confirmed.
The path runs from sample to test print to quotation, then order and shipping, with white ink and pre-treatment liquid discussed alongside the colour inks because the same machine prints them all.
From sample to supply
- Send your set-up
- Printer model, printhead, substrate or fabric, the colours you run and your expected monthly volume.
- Sample and test print
- Hongsam proposes a matching ink series and arranges samples so you can test on your own machine.
- Quotation and order
- Packaging, colour set and order quantity are confirmed in the quotation before production.
- Shipping
- Inks are packed for export and shipped with the product documentation for your order.
Request a quotation
Send your printhead model, fabric or media and the colours you need; we will propose a matching ink series.
Or write to sales@inkjetinksupplier.com