HONGSAMRequest a quoteQuote

Pigment vs Dye Ink: How to Choose for Your Printing Application

Pigment inks carry dispersed colorant particles; dye inks carry dissolved colorant. That single difference shapes color strength, fastness, substrate choice and printhead maintenance. Hongsam, founded in 2001, makes inkjet inks and supplies water-based pigment and dye inks for textile, image and packaging printing.

Get advice for your print set-up

Dye ink bottles (Pigment and dye ink)

Pigment vs Dye Ink: Core Chemistry and Print Behavior

The difference between pigment and dye ink starts with the colorant. A pigment ink carries fine colorant particles dispersed in a liquid carrier, and those particles stay on the surface of the substrate, held by a binder. A dye ink carries colorant fully dissolved in the carrier, so the colorant soaks into the fiber or the coating. That is why pigment vs dye ink decisions usually come down to surface color against penetration, and why the same artwork can look different in each chemistry.

  • Colorant state: pigment — particles dispersed in the carrier; dye — colorant fully dissolved.
  • Color result: pigment — opaque surface color with density on dark stock; dye — high chroma, transparent layering, smooth gradients.
  • Light fastness: pigment particles resist fading over long display periods; many dye classes fade sooner.
  • Water and abrasion: pigment films resist surface water and rubbing; dyes can re-wet and migrate, especially on synthetic fibers.
  • Printhead care: pigment inks need circulation and capping to keep particles suspended; dye inks keep nozzles wet more easily.
  • Substrate fit: pigment for coated and uncoated paper, board, film and fabric; dye for ink-receptive coated paper and porous textile fibers.

Print behavior follows the colorant form. On fabric, pigment ink stays near the surface and its durability rests on the binder film, so textile pigment work such as textile pigment ink normally pairs the ink with a pre-treatment and a post-treatment liquid. Dye chemistry, including reactive ink, penetrates the fiber and bonds inside it, which changes both the color result and the washing behavior. On paper and film, pigment inks hold on coated and uncoated surfaces, while dye inks need an ink-receptive layer to show their chroma.

Pigment Ink vs Dye Ink: Durability, Color and Substrate Fit

Durability usually points to pigment ink. The particles sit near the surface under a binder, so light, water and rubbing act on a film rather than on colorant that has soaked into the material, and pigment grades can be chosen for long outdoor display. Dye inks take the color lead: dissolved colorant gives high chroma, clean overlaps and smooth photographic gradients. The trade-off is that many dyes fade faster under light and re-wet when the print meets water.

  • Textile and apparel: pigments suit direct-to-fabric and garment printing where wash fastness and a controlled hand feel matter; reactive, acid and disperse dyes suit fabrics that need deep penetration and soft drape.
  • Image and advertising: dye inks give the gradient smoothness that photo and proofing work expects, while pigment inks hold up on banners, posters and media exposed to light.
  • Packaging and paper: pigment inks print on corrugated board and uncoated paper without a special coating; dye inks show their strength on coated, ink-receptive stock.
  • Finishing: a pigment print often needs a binder, a pre-treatment or a post-treatment step, while a dye print leans on fiber type and washing or steaming after printing.

Workflow weighs in as well. Pigment inks demand a dispersion that stays stable in the printhead, so filtration, circulation, capping and a maintenance rhythm matter more; dye inks are more forgiving during idle time but need the right fiber or coating to fix. Ink-set consistency across a batch also matters when a run spans several printers, because shade shifts show up faster on transparent dye color than on opaque pigment film.

Dye vs Pigment Ink: Selection Checklist for Printers and Converters

Work through this checklist before a production run, because the answer depends on the job rather than on the ink alone.

  • Substrate or fiber: name the exact material, coating and weight, since pigment and dye inks behave differently on coated paper, uncoated board, polyester, cotton and blends.
  • Required fastness: state whether the print must survive light, washing, rubbing or water contact, and for how long.
  • Color target: decide whether the job needs high chroma, opacity over a dark base, or soft photographic gradients.
  • Printer and printhead compatibility: confirm the ink grade matches the printhead and the ink system on your machine.
  • Pre-treatment and post-treatment: check what the process adds in equipment, drying and floor space.
  • Trial plan: print the real file on the real substrate and test the finished article before committing to a run.

Confirm suitability with the supplier’s technical data and a printed test on your own material. Ask for the colorant class, the recommended substrate range, fastness results on your substrate, and the printhead maintenance routine; then print a representative file, finish it as production would, and check light, wash and rub behavior. HONGSAM offers both water-based pigment ink and water-based dye ink, so pigment ink and dye ink can be compared on the same file and the same substrate.

Ink Chemistry Across Hongsam’s Textile, Image and Packaging Lines

Hongsam focuses on the R&D, production and sales of inkjet inks, was founded in 2001 and is based in Zhengzhou, Henan. The range covers digital textile printing inks, ad and image printing inks, digital printing inks for packaging and paper, and inkjet printers under the Hong-Jet® brand, including DTF, sublimation, latex and textile printers. JETTEXTILE® Textile Pigment Ink covers the pigment route on fabric, while textile inks for dye-based work follow the reactive, acid, disperse and cationic families.

Hongsam holds 15 invention patents, runs 16 R&D laboratories and environmental testing rooms, keeps more than 560 test printers and has 31–40 people in its R&D team. For image and packaging work the split is the same: pigment inks suit board, corrugated and uncoated stock, and dye inks suit coated paper where chroma counts.

Sampling and Quotation Steps for Ink Selection

Send the printer model, the printhead model, the substrate or fabric type, and the color and fastness targets you need. Hongsam reviews the combination against its ink grades, sends a sample of the matching ink, and runs a test print on your material so color, hand feel and durability can be compared with your current output. A quotation follows confirmation of ink grade and order volume, and shipping is arranged once the order is placed.

The same review covers auxiliary liquids where the process needs them, such as a pre-treatment or post-treatment for textile pigment work, and the maintenance routine that keeps the chosen ink running in production. Printer and printhead details travel with the substrate sample to Hongsam’s technical team, who reply with the ink grade that fits the job and the test print to run.

Request a quotation

Share your printer, substrate and the result you want to reach.

Or write to sales@inkjetinksupplier.com

* Required